A Powder Cationic Polymer

Availability: In stock

  • Buy 2 for $481.00 each and save 7%
  • Buy 5 for $457.00 each and save 12%


  • OMEGA CP-1020 is a powdered, cationic, high molecular weight polyelectrolyte with 20% charge
  • OMEGA CP-1020 will react quickly at a pH level of 1 to 13 to neutralize and/or condition particle charge differentials.
  • As a dewatering agent, OMEGA CP-1020 works effectively on belt press, vacuum filter, screw press, centrifuge, air floatation, and clarification/thickening equipment
  • OMEGA CP-1020 increases settling rate, floc size, and improves clarity in clarifiers.
  • In DAF equipment, OMEGA CP-1020, provides increased throughput and larger float solids.

Additional Information

Typical Properties

Type: Cationic polyamine based polyelectrolyte

Form: Powder

Charge: 20% charge density

Molecular Weight: High

Appearance: White powder

Odor: Odorless

Dosage Range and Feed Methods

The OMEGA CP-1020- dosage will range from 0.1 ppm to 20 ppm depending upon solids composition and particle charge differential.
A solution of OMEGA CP-1020 is prepared by the following procedure.

  1. Add water to the solution tank until about 50% full.
  2. Activate a mixer of high RPM (300 to 800 RPM is recommended)
  3. Continue to add water and slowly sprinkle OMEGA CP-1020 into the water vortex, or dose via a polymer disperser.
  4. OMEGA CP-1020 should be added until a 0.1% solution of OMEGA CP-1020 is added by weight. (1.0 lbs. per 100 gallons of water)
  5. The mixer should remain on for 20 minutes to complete the polymerization of OMEGA CP-1020. Do not exceed 30 minutes of mixing time.

Ready-made solutions of OMEGA CP-1020 are acceptable for use for 30 days. A new solution should be made after this time period.

Tanks of plastic or mild steel composition are acceptable. Pumps of plastic or metal composition are recommended. Alloys of brass, copper, galvanized, or aluminum, are not compatible.

Safety and Handling

OMEGA CP-1020 should not come in contact with skin, eyes, or hair. Use appropriate safety equipment to prevent contact. If contact does occur, flush area with soap and water for 15 minutes.

Bags and containers of OMEGA CP-1020 should be tightly closed after use. OMEGA CP-1020 is hydroscopic and will swell in humid atmospheres. Store in a dry and cool location.

Container Size and Shipping

OMEGA CP-1020 is available in 55 lb. bags

Environmental Concerns

Spills of OMEGA CP-1020 are very slippery and should be localized and contained with absorbent material. Do not attempt to wash down spills to dilute product. As with any chemical application for waste treatment, conform to all applicable regulatory criteria.

in the News

Keep up with the WaterCare industry and the Chemical Applications for the Treatment of Cooling Water, Boiler Water, and Wastewater...


As a new addition to the WaterCare product line, OMEGA MP-5152 provides multiple benefits.

Read the full post
Posted By Coventya WaterCare

The challenge of water resource management is viewed as our corporate responsibility. Coventya WaterCare is committed to the following: Return, Renewal, and Recycle

Read the full post
Posted By Coventya WaterCare

Simple soulutions to meet your boilers requirements. 15 and 55 gallon drums are available in OMEGA TH-7125, OMEGA TH-7127, and OMEGA TH-7129.

Read the full post
Posted By Coventya WaterCare